DNT系列搖臂式臺面點焊機 DNT Series Table Spot Welding Machine 整機特性： 1、 焊接電源可做成交流點焊或中頻逆變直流點焊兩種，可根據不同的焊接材料選型； 2、 下電極為水平平臺式：焊接范圍大，焊后工件平整、不易變形，焊點下面光滑無痕； 3、 上電極為多關節搖臂式，焊接方便，不用移動工件，只移動焊槍即可在整個臺面內焊接任何地方； 4、 同時焊接平臺可在200mm范圍內任意升降，方便不同形狀和高度產品焊接； 5、 機器操作桿可做成垂直焊接或杠桿加壓焊接兩種，可對不同的工件選用不同的形式，操作方便，更安全可靠。 主要技術參數： 額定功率：50KVA-200KVA 額定電壓：220V/380V-420V（任選）頻率：50Hz/60Hz 氣源氣壓：≥0.5Mpa; 電極壓力：≥2.2KN； 臺面尺寸：800×1000mm（可定制）； 臺面高度：750-950mm（200mm自動升降）； 焊槍形式：水平式/垂直式（任選一種或兩種）；焊槍總長：395mm（可配垂直式焊槍）； Main Feathers.Applications 1. There are two types of Welding Power Source : AC Spot Welding.Medium Frequency inverter DC spot welding; 2. The lower welding electrode is designed level flat table:Welding range increased,the welded workpiece stays very flat,not deformed,no mark.smooth under welding point; 3. The up welding electrode is designed as Multi-joint arm, welding easily, without moving work piece, only move the welding gun, can weld any position in the range of the down flat table; 4. At the same time in the 200mm range the lower welding flat table can go up.down freely, by this way it is suitable for welding various shape.size of products; 5. Welding Gun can be made in two types: Vertical Welding.Horizontal Welding,choosed according to different workpiece,More easily operating.freely, safe.reliable. Main Technical Parameters: Rated Capacity: 50KVA~200KVA, Input Voltage:220V/380V~480VAC(Optional), 50Hz/60Hz Air Source Pressure: =0.5Mpa; Electrode Force: =2.2KN Welding Table Size:800mm(W) ×1000mm(L); Welding Table Height: 750~950mm (200mm Stroke); Welding Gun Type: Horizontal Gun.Vertical Gun (Optional); Welding Gun Length: 395mm; Machine Size : L:1580mm×W:1000mm×H:1900mm; Machine Weight: 850kg