特點:
1,可長期耐500-700℃高溫并保持顏色無變化防腐蝕。
2,具有保護作用,表面輻射系數(shù)大,節(jié)能效果好
用途:
用于各種管狀電熱原件,和其他電熱原件,以及各種高溫金屬機械表面等。
技術(shù)指標:
·顏色 |
||||
·光澤 |
無光 |
|||
·標準干膜厚度,um/道 |
35 |
|||
·理論涂布率(g/㎡) |
110 |
|||
·耐沖擊強度,kg.cm |
40 |
|||
·干燥時間 |
烘烤溫度 |
190±5℃ |
||
實干(h) |
2 |
|||
·最短涂裝間隔(h) |
5℃ |
23℃ |
30℃ |
|
24 |
16 |
8 |
1,Remove salt and other water-soluble contaminants by fresh water hosing.
用清水沖去鹽份及其它水溶性污物。
2,Degrease according to SSPC-SP1 solvent cleaning.
依照SSPC-SP1溶劑清洗標準除去油脂。
3,Remove weld spatter and smooth weld seams and sharp edges.
除去焊接飛濺并處理焊縫,毛刺使其光順。
4,Remove rust, mill-scale and damaged primer by blasting to ISO Sa2.5 (SSPC-SP10) or by power tooling to ISO St3.0.
用噴砂方式除去鐵銹,氧化皮和損壞的底漆達到ISO Sa2.5 (SSPC-SP10) 或用電動工具處理表面達到ISO St3.0。
5,Remove dust and dirt by high–pressure air before paint application
用高壓空氣吹掃除去灰塵等污物。
6,Be sure that the surface is clean and dry prior to application.
施工前確認表面清潔干燥。